Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 158)

LabMaster 9 Zi-A
150 922157-00 Rev A
2. Touch one of the persistence mode buttons next to an input
channel.
To turn off persistence for an individual channel, touch the left-most
persistence mode button next to the channel.
OR
For each input channel, touch its tab to set up persistence for that
channel.
3. Touch one of the mode buttons.
4. Touch the Show last trace checkbox if you want the last trace
displayed.
5. Touch inside the Saturation data entry control and enter a whole
number integer,.
6. Touch inside the Persistence time data entry control and make a
selection from the pop-up menu.
7. If you want to return all input channel setups to their default
settings, touch the Reset All button.
WaveStream Display Mode
This fast viewing mode provides brightness-graded intensity with
a decay time similar to the action of phosphor on an analog
screen.