Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 20)

LabMaster 9 Zi-A
12 922157-00 Rev A
Back of MCM-Zi Master Control Module
Number and Description
1. ChannelSync Outputs
- SMA 10 GHz Clock
and PCIe 1 Lane
Control Connections
(for corresponding
Acquisition Modules)
2. 10 MHz Reference
Clock Output
3. 10 MHz Reference
Clock Input
(Grounded EMI Shield
required when port is
not in use)
4. Removable Storage
Drive
5. AC Power Inlet
6. Input/Output Panel
7. DVI-D Video Output
8. PCIe 4 Lane Data
Inputs (from
corresponding
Acquisition Modules)
PLEASE NOTE THE FOLLOWING:

Cap-off unused ChannelSync SMA sockets (item 1) using the provided
chain-linked 50 Ω terminations (not shown).

10 MHz Reference Clock Inputs are specifically intended for
synchronization with other instruments; not between Master Control
Module and Acquisition Modules.

DVI-D Video Output is for use with an additional external monitor for
Extended Desktop mode.

The AUX IN connection is for 50 Ω input only.