Labmaster 9 zi-a – Teledyne LeCroy LabMaster 9Zi-A User Manual
Page 40
Advertising
LabMaster 9 Zi-A
32
922157-00 Rev A
DVI-D Connection - Video Card to Touch-Screen Display on
the Master Control Module
The DVI-D Video Output must be connected to the DVI-D Video Input
(both on the back of the Master Control Module) using the provided DVI-D
cable for the touch-screen display to function.
Connect one end of the provided DVI-D cable into the DVI-D Video Output
on the back of the Master Control Module.
Now, connect the other end of the same DVI-D cable into the DVI-D Video
Input, also on the back of the Master Control Module.
Advertising