Teledyne LeCroy LabMaster 9Zi-A - Manual (Page 29)

Getting Started Manual
922157-00 Rev A 21
MCM-Zi Master Control Module
The I/O panel is located on the back of the MCM-Zi Master Control Module
(page 12).
Number and Description
1. Mouse
2. Keyboard
3. Host USB Ports
4. 9-pin Serial Port
(disabled)
5. 15-pin Video Output
(disabled)
6. Ethernet ports (LAN)
NOTE: The MCM-Zi motherboard is a server-class motherboard with certain I/O
capabilities (serial port, VGA/WXGA video output) that are not utilized by the
MCM-Zi, even though the physical connectors remain on the I/O panel. The 9-pin
serial port is used for communication to the server motherboard, and the 15-pin
video connector only outputs text debug messages from the motherboard. Since
these capabilities are not useful for the MCM-Zi, they are disabled in the BIOS and
will not provide any I/O should you connect to them.