Write_authentication_enable, Write_class_of_device, Write_authentication_enable write_class_of_device – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 121
105
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
Write_Authentication_Enable
This command will write the value for the Authentication_Enable
parameter, which controls whether Merlin’s Wand will require
authentication for each connection with other Bluetooth devices.
Write_Class_of_Device
Write_Class_of_Device will write the value for the Class_of_Device
parameter, which is used to indicate its capabilities to other devices.
Command Parameters
Examples
Comments
Authentication_Enable
0x0
0x00=Authentication
disabled. Default
0x01=Authentication
enabled for all connection
Return Events
Write_Authentication_Enable_Complete
Write_Authentication_Enable_Error
Command Parameters
Examples
Comments
CoD
0x000000
Class of Device for the
device
Return Events
Write_Class_of_Device_Complete
Write_Class_of_Device_Error