Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 59)

43
CATC M ERLIN ’ S W AND 2.00 C HAPTER 4
User’s Manual Command Generator
4. Command Generator
The Command Generator is a tool in Merlin’s Wand that presents a menu of
protocol commands so that you can select and execute any command in
virtually any sequence. Command Generator thus gives maximum control
over the traffic generation process.
Command Generator requires that you build connections from the Baseband
level on up. This means that to establish an OBEX connection, for example,
you will need to first start with Baseband and work your way up the protocol
stack. You cannot simply start at a higher protocol.
The utility displays a window with tabs for these protocols: HCI (which
induces Baseband, LMP and Module-Specific Commands), L2CAP, SDP,
RFCOMM, TCS, and OBEX. Clicking a tab or a name in the protocol stack
graphic opens a window and presents a menu of commands for that
protocol.
4.1 Layout of the Command Generator
The Command Generator utility is composed of the following:
Tabs -- There is a tab for each of six protocols: HCI, L2CAP, SDP,
RFCOMM, TCS, and OBEX. Clicking a tab displays the Command Menu
for the chosen protocol.
Command Menu -- A list of commands is provided for each protocol.