Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 97)

81
CATC M ERLIN ’ S W AND 2.00 C HAPTER 8
User’s Manual Using Merlin to Record Merlin’s Wand Traffic
8.6 Set Merlin Display Options
The display options file [*.opt] that Merlin should use can be specified
through Merlin's Wand. If a display options file isn't specified through
Merlin's Wand, Merlin will use either its default .opt file or the options file
that was last loaded into the current instance of Merlin.
Note : The .opt file has to be configured and saved in Merlin before it can be specified
through Merlin's Wand.
Step 1 Share the folder that contains the file.
(a) In Windows Explorer or My Computer, navigate to the folder that
contains the options file.
(b) Right-click on the folder and select Properties, or select File >
Properties from the menu bar.
The Properties dialog will open.
(c) Go to the Sharing tab in the Properties dialog.
(d) Enable the “Share this folder” option and make sure that the folder is
accessible by both the machine running Merlin and the machine
running Merlin's Wand.
(e) Click OK.
Step 2
Click the Set Display Options button.
The Open dialog will be displayed.
Step 3
Use the Look in field at the top of the dialog box to browse