Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 98)

82
CATC M ERLIN ’ S W AND 2.00 C HAPTER 8
User’s Manual Using Merlin to Record Merlin’s Wand Traffic
to the desired file via Network Neighborhood
-or-
In the File name field, type \\ followed by the name of the computer
on which the file is located (for example, \\Computer1). Press Enter
to display all shared folders, then navigate to the desired file.
Note : A full network path must be used in order to specify the options file through
Merlin's Wand, whether the file is local to the machine running Merlin or located
on a different computer.
Step 4
Click Open.
The path and filename of the display options file will now be listed on
the Set Display Options drop-down menu. By default, that file will be
selected, as indicated by the checkmark that appears to the left of the path
and filename.
8.7 Set Merlin Encryption Options
Merlin's Wand can set up Merlin to decode encrypted transmissions.
Step 1
Open the Encryption Setup dialog by pressing the Set
Merlin encryption options
button.
The Encryption Setup dialog will open.
Step 2 Select the Slave Device Address from the drop-down list, or
enter it into the combo box.
Step 3
Enter the PIN Number for the slave device in the PIN Code
text box.
or