Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 141)

125
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
RegisterServerChannel
This command will register ServerChannel with an RFCOMM server so
that the server can respond to incoming OpenClientChannel requests.
RequestPortSettings
This command will request a change to the current PortSettings.
Parameter Values:
• BaudRate: Specifies the baud rate. Note that the baud rate setting does not
actually affect RFCOMM throughput.
Values: 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230400
• DataFormat: The following values identify the number of data bits.
Values:
0x00 -- DATA_BITS_5
0x02 -- DATA_BITS_6
0x01 -- DATA_BITS_7
0x03 -- DATA_BITS_8
• Flow Control:
Values:
Command Parameters Examples Comments
AttachTo Command_Generator
Virtual_COM_Port
Return Events
RegisterServerChannel_Complete
RegisterServerChannel_Error
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02) For values, see below.
BaudRate 9600
DataFormat 0x02
FlowControl 0x00
Xon 0x11
Xoff 0x13
Return Events
RequestPortSettings_Complete
RequestPortSettings_Failed