Catc_change_headset_gain, Catc_read_headset_gain, Catc_change_headset_gain catc_read_headset_gain – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 129
113
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
A
User’s Manual
Command Generator Command Descriptions
CATC_Change_Headset_Gain
Controls the gain of the microphone or speaker of the headset.
CATC_Read_Headset_Gain
Reads the gain of the microphone or speaker of the headset.
BER_Packet_Type
03
0x00=DH1
0x01=DH3
0x02=DH5
0x03=DM1
0x04=DM3
0x05=DM5
Test_Data_Type
00
0x00=Send PBRS (same as
in Bluetooth test mode)
0x01=Every octet that is
sent equals Test_Data
Test_Data
FF
Data to send
BER_Interval
10
A packet is sent every
BER_Interval frame
Return Events
CATC_BER_Test_Complete
CATC_BER_Test_Error
Command Parameters
Examples
Comments
Device
“Speaker”
“Microphone” or “Speaker”
(“Speaker” is default)
Gain
0
0x00 - 0x0F
Return Events
CATC_Change_Headset_Gain_Complete
CATC_Change_Headset_Gain_Error
Command Parameters
Examples
Comments
Device
“Speaker”
“Microphone” or
“Speaker”
(“Speaker” is
default)
Return Events
CATC_Read_Headset_Gain_Complete
CATC_Read_Headset_Gain_Error
Command Parameters
Examples
Comments