Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 80)

64
CATC M ERLIN ’ S W AND 2.00 C HAPTER 6
User’s Manual Device Search and Device List Pop-Up Menu
Step 2
Choose Connect from the menu.
The status of the target device should change from In Range to
Connected in the Device List. The Piconet tab should now indicate that
Merlin's Wand has an ACL connection to the target device.
Step 3
Reopen the Pop-Up Menu
by right-clicking on the target
device in the Device List.
The Device List Pop-Up
Menu will open. If the
remote device supports
audio connections and
Merlin's Wand is connected to it, then the Add Audio Connection
command should be available.
Step 4 Select Add Audio Connection from the menu.
The status of the target device will not change in the Device List;
however, the Piconet tab should indicate that Merlin's Wand has an SCO
connection to the device.
Step 5
To verify that Merlin's Wand and the Bluetooth device are
successfully connected, speak into the microphone on one
device and listen for audio on the other.
Display Device Information
Note : The following instructions assume that Merlin's Wand is currently connected to a
remote device.
Step 1 Open the Pop-Up Menu by
right-clicking on the target
device in the Device List.
The Device List Pop-Up
Menu will open.