Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 241)

225
CATC M ERLIN ’ S W AND 2.00 C HAPTER C
User’s Manual Merlin’s Wand Scripting Commands
Return value
Returns a list with three values: status, DLCI, and BluetoothDevice.
Status (element 0) is one of the following:
• “Success”
• “Timed out”
• “Failure”
DLCI (element 1) is the data link connection identifier.
BluetoothDevice (element 2) is the address of the connecting device.
Comments
Waits Timeout milliseconds for a device to establish an RFCOMM con-
nection with Merlin’s Wand. This function will block the specified amount
of time (or infinitely if 0 is specified) unless a connection is established. If
an RFCOMM connection is already present when this function is called, it
will immediately return “Success”.
Example
# Wait 3 seconds for RFCOMM connection
Trace("RFWaitForConnection\n");
result = RFWaitForConnection(1, 3000);
if( result[0] == "Success" )
{
Trace("Incoming RFCOMM connection DLCI: ", result[1],
"\n");
Trace("Connecting device address: ", result[2], "\n");
}
RFAcceptChannel()
RFAcceptChannel(bAccept)
Return value
• “Success”
Parameter Meaning Default Value Comments
bAccept Boolean value
indicating
whether to
accept the
channel or not
0 0 or 1