Hcipincoderequestreply(), Hciqossetup(), Hcipincoderequestreply() hciqossetup() – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 194: Hcipincoderequestreply(address, pincode), Success” • “failure, Specifies the pin code to use for a connection
178
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
C
User’s Manual
Merlin’s Wand Scripting Commands
HCIPINCodeRequestReply()
HCIPINCodeRequestReply(Address, PINCode)
Return value
•
“Success”
•
“Failure”
Comments
Specifies the PIN code to use for a connection.
Example
result = HCIPINCodeRequestReply('6C421742129F9', "New PIN
Code");
Trace("HCIPINCodeRequestReply returned: ", result, "\n");
HCIQoSSetup()
HCIQoSSetup(Address, ServiceType, TokenRate,
PeakBandwidth, Latency, DelayVariation)
Parameter
Meaning
Default Value
Comments
Address
Bluetooth
address of
device for
which PIN
code will be
used.
PINCode
PIN code to
use when con-
necting to the
device.
Must be 1 to 16 characters in length.
Parameter
Meaning
Default Value
Comments
Address
Bluetooth
address of the
remote
ServiceType
The one-byte
service type:
0=No traffic;
1=Best effort;
2=Guaranteed
TokenRate
The four-byte
token rate
value in bytes
per second