Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 140)

124
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
CreditFlowEnabled
This command is used to check if credit-based flow control has been
negotiated for the current RFCOMM session.
DeregisterServerChannel
Deregisters an RFCOMM server channel.
OpenClientChannel
This command will open an RFCOMM channel.
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02) The DLCI value is returned
by the OpenClientChannel
command
Return Events
CreditFlowEnabled_Complete
Command Parameters Examples Comments
ServerChannel 0x01 ServerChannel must first be
registered via
RegisterServerChannel
command.
Return Events
DeregisterServerChannel_Complete
DeregisterServerChannel_Error
Command Parameters Examples Comments
HCI_Handle 0x0001
ServerChannel 0x01 Range: 1-30
MaxFrameSize 0x7F Range: 23-32767
Default is 127
Credit 0x20 The number of frames that
the sender has available
AttachTo Command_Generator
Virtual_COM_Port
Return Events
OpenClientChannel_Complete
OpenClientChannel_Failed