Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 144)

128
CATC M ERLIN ’ S W AND 2.00 C HAPTER A
User’s Manual Command Generator Command Descriptions
SendATCommand
This command will send a selected AT command.
A.7 Other RFCOMM Events
BreakLength 0x00 0-15 indicates the length of the break signal in
200ms units.
0 indicates no break signal.
Return Events
SetModemStatus_Complete
SetModemStatus_Failed
Command Parameters Examples Comments
(HCI/DLCI) (0x0001, 0x02)
AT_Command RING Values:
AT + CKPD = 200:
Headset Button pressed.
AT + VGM = 1:
Microphone gain.
+VGM = 1: Microphone
gain 1.
RING
OK
ERROR
BUSY
CONNECT
NO_CARRIER
NO_DIAL_TONE
Return Events
Send_AT_Command_Complete
Send_AT_Command_Error
Events
OpenClientChannel_Request
CloseClientChannel_Indication
Data_Indication
PortNegotiation_Indication
RequestPortStatus_Indication
ModemStatus_Indication
Command Parameters Examples Comments