L2capconfigurationresponse(), L2capconnectrequest(), L2capconfigurationresponse() l2capconnectrequest() – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 255: L2capconfigurationresponse(reason), Success” • “failure, L2capconnectrequest(address, psm, receivemtu)
239
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
C
User’s Manual
Merlin’s Wand Scripting Commands
L2CAPConfigurationResponse()
L2CAPConfigurationResponse(Reason)
Return value
•
“Success”
•
“Failure”
Comments
This command is used to automatically send the response to an incoming
configuration request. It should be executed before an incoming configura-
tion request.
Example
L2CAPConfigurationResponse("Reject-unknown options");
L2CAPConnectRequest()
L2CAPConnectRequest(Address, PSM, ReceiveMTU)
Parameter
Meaning
Default Value
Comments
Reason
Configuration
response
“Accept”
Possible values:
“Accept”
“Reject-unknown options”
“Reject-unacceptable params”
“Reject”
TokenRate
TokenBucketSize
PeakBandWidth
Latency
DelayVariation
Parameter
Meaning
Default Value
Comments
Address
Bluetooth
address of the
remote device
PSM
ReceiveMTU
0x01C2