Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 38)

22
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
To send fax data:
Note A modem driver must be installed on the virtual COM port in order to use a fax
application to send data through Merlin’s Wand. See“Install a Modem Driver on
the Virtual COM Port” on page 40 to find out how to install the driver. Once the
driver is installed, you must create a fax printer and configure it to use the driver
that you have installed.
Note A fax application must be installed on the host computer in order to perform this
operation.
Open the fax application and send a fax. It will use the modem driver on
the virtual COM port to send the data to the Fax Gateway device through
Merlin’s Wand.
Enable or disable event logging:
You can configure Merlin’s Wand to write incoming or outgoing data to
the Event Log by checking or unchecking the “Log Incoming Data” and
“Log Outgoing Data” options.
Connect to Device: File Transfer
These steps show how to configure Merlin’s Wand to connect to and
transfer data with a Bluetooth device that uses the File Transfer profile. This
allows you to browse the directories on the device, transfer files to or from
the device, and delete files or create new folders in the device’s file system.
Step 1
Complete steps 1-6 in Section 3.2, “Connecting to Devices”
on page 17.
Step 2
Select File Transfer from the list on the Select Profile screen.
(Optional) Select the Allow Role Switch option on the screen to enable
Merlin’s Wand to switch roles during the connection.
Step 3 Click Next.
Merlin’s Wand will establish an OBEX connection with the device, and
the Wizard will advance to the File Transfer screen.
Step 4
You can now perform the following on either the remote
device or the local device (Merlin’s Wand):
•
Create a new folder — To create a new folder in either device’s file
directory, right-click on the directory level in which you wish to place
the new folder, then choose “Create new folder” from the menu that
pops up.
The Enter Folder Name dialog will appear. Type in a name for the
new folder, then click OK. The new folder will appear in the chosen
directory.