Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 58)

42
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
button.
Step 8 Browse for the BTTNet.INF file and select it by pressing the
“Open” and “OK” buttons. The list of network adapters
should include the driver “CATC Bluetooth Trainer PAN
virtual NIC.”
Step 9 Press Next.
Step 10
In the “Start Hardware Installation” page, press the Next
button. At this time, Windows installs the driver and plots a
proper text in the installation wizard.
Step 11
Press Finish.
Verifying the Driver’s Installation
To verify that the drivers installed properly, go to the “Device Manager”
utility, and display the properties for the “CATC Bluetooth Trainer PAN
virtual NIC” driver under “Network Adapters.”
Note The MAC address of the NIC driver is based on the BD address of Merlin’s Wand.
The MAC addr will be rewritten every time the BNEP_Register is executed.
Configuration of Virtual NIC
To configure the network properties of the “CATC Bluetooth Trainer PAN
Virtual NIC,” do the following:
Step 1 Select Start > Settings > Control Panel from the desktop
taskbar, then double-click on “Network and Dial-up
Connections” in the Control Panel window.
Step 2
Locate the “CATC Bluetooth Trainer PAN virtual NIC”
Local Area Connection.
Step 3
Select File > Properties. Now you can change the network
settings for your Bluetooth network connection.