Testing commands, Catc-specific commands, Testing commands catc-specific commands – Teledyne LeCroy Merlins Wand - Users Manual User Manual
Page 67: Not supported, Supported not supported, Supported
Advertising
51
CATC M
ERLIN
’
S
W
AND
2.00
C
HAPTER
4
User’s Manual
Command Generator
Not Supported
Testing Commands
Supported
Not Supported
There are no unsupported Testing commands.
CATC-Specific Commands
Supported
Commands
Get_Link_Quality
Read_Failed_Contact_Counter
Reset_Failed_Contact_Counter
Read_RSSI
Commands
Parameters
Enable_Device_Under_Test_Mode
N/A
Read_Loopback_Mode
N/A
Write_Loopback_Mode
Loopback_Mode
Commands
Parameters
CATC_BER
HCI_Handle
Number_Of_Packets
BER_Packet_Type
Test_Data_Type
Test_Data
BER_Interval
CATC_Change_Headset_Gain
Device
Gain
CATC_Read_Headset_Gain
Device
CATC_Read_PIN_Response_Enable
N/A
CATC_Read_Revision_Information
N/A
CATC_Self_Test
N/A
CATC_Set_Default_PIN_Code
Pin_Code
CATC_Write_PIN_Response_Enable
PIN-Response_Enable
Advertising