Teledyne LeCroy Merlins Wand - Users Manual - Manual (Page 50)

34
CATC M ERLIN ’ S W AND 2.00 C HAPTER 3
User’s Manual Profile Wizard
Step 2
You can now do any of the following:
•
Change the folder in which transferred files are stored: Click the
Change... button to open the Browse for Folder dialog. Select the
folder in which you want transferred files to be stored. Click OK to
confirm the change.
•
Change the maximum size for data credits: Click the Change
maximum size... button to open the Change Data Credit Maximum
Size dialog. Type in a new credit size, in bytes. Click OK to confirm
the change.
•
Set the LPT status bits: Check or uncheck the status bits to change
their settings.
Paper empty: Checked = 1 = Paper empty; Unchecked = 0 = Paper not
empty
Selected: Checked = 1 = Selected; Unchecked = 0 = Not selected
Error: Checked = 0 = Error; Unchecked = 1 = No error
•
Change or add a printer ID string: Click Change printer ID string...
to open the Change Printer ID String dialog. Enter strings as
KEY:VALUE pairs or vendor-specific pairs. Individual strings must
be separated by semicolons. Click OK to confirm changes.
•
Send a file to the printer: Click the Print... button to access the Open
dialog. By default, the file that was most recently transferred to the
HCRP server will be selected; however, you may browse to a
different file, if you wish. Click Open to print the file.
Emulate Device: Headset
Merlin’s Wand can be configured to emulate a wireless device that
conforms to the Bluetooth Headset profile. The following steps show how
to set up Merlin’s Wand as a Headset device and connect to it with a remote
Bluetooth headset.
Step 1
Complete Steps 1-4 in Section 3.3, “Emulating Devices” on
page 30.
The Headset Emulation screen will open, indicating that Merlin’s Wand
has been configured to emulate a device that supports the Headset profile
and is awaiting connection from a device.
Note The Speaker and Microphone Volume levels shown in the previous screenshot
reflect the volume settings on the Master device. If you adjust the levels on the
remote device, the displayed volume levels will change accordingly.
Step 2
Direct a remote Bluetooth device to connect to Merlin’s