Vanguard TRM-203_403 User Manual
Page 52
TRM-203 AND TRM-403 USER’S MANUAL
REV 1
48
r. The following screen will be displayed after the last “Raise” position’s resistance reading
is stored:
1. YES
Press the
[1]
key (YES) to print the test results on the built-in thermal printer. A
Typical LTC/Voltage Regulator test report is shown in Figure 7. Continue to step s.
2. NO
Press the
[2]
key (NO) to bypass printing of the test results. Continue to step s.
s. The following screen will be displayed:
1. YES
Press the
[1]
key (YES) to save the test record. The following screen will be
displayed:
Press any key to return to the “START-UP” menu.
2. NO
If you do not wish to save the test record, press the
[2]
key (NO). The following
screen will be displayed:
record number 09
has been saved!
SAVE THIS RECORD?
1.
YES
2.
NO
PRINT RECORD?
1.
YES
2.
NO