Vanguard TRM-203_403 User Manual
Page 84
TRM-203 AND TRM-403 USER’S MANUAL
REV 1
80
3.16.6. Erasing Test Records
Use the steps below to erase test records from the TRM’s Flash EEPROM or from a connected
USB Flash drive:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[3]
key (SAVE/RESTORED RECORD).
c. The following screen will be displayed:
Press the
[4]
key (ERASE RECORD).
NOTE
Option 5 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the unit.
If a USB Flash drive is connected, continue to step d.
If a USB Flash drive is NOT connected, continue to step e.
1.
RESTORE RECORD
2.
SAVE RECORD
3.
RECORD DIRECTORY
4.
ERASE RECORD
5.
COPY TO THUMB DRIVE
1.
RECORD ID
2.
PRINT RECORD
3.
SAVE/RESTORE RECORD
4.
SET TIME
5.
SET LANGUAGE
1.
RUN TEST
2.
SETUP
3.
USER DIAGNOSTICS
07/27/12
08:55:25
22
°C 72°F