Vanguard TRM-203_403 - Manual (Page 78)

TRM-203 AND TRM-403 USER’S MANUAL REV 1
74
d. The following screen will be displayed:
1. INTERNAL STORAGE
Press the [1] key (INTERNAL STORAGE) to restore a test record from the unit’s
internal Flash EEPROM. Continue to step e.
2. THUMB DRIVE
Press the [2] key (THUMB DRIVE) to restore a test record from a connected USB
Flash drive. The following screen will be displayed:
Type the record number using the keypad and then press the
[ENTER]
key. If you
do not know the record number, you can first print a test record directory (see
section 3.16.3). After the test record has been restored to the working memory, the
following screen will be displayed:
Press the [1] key (YES) if you would like to print the restored test record. The test
record will be printed and you will be returned to the “START-UP” menu. The
restored record will remain in the working memory.
Press the [2] key (NO) if you do not want to print the test record. You will be
returned to the “START-UP” menu. The restored test record will remain in the
working memory.
REC_001 RESTORED!
PRINT RECORD?
1.YES
2.NO
RESTORE THUMB DRIVE
REC_
1. INTERNAL STORAGE
2. THUMB DRIVE