Vanguard TRM-203_403 User Manual
Page 77
REV 1 TRM-203 AND TRM-403 USER’S MANUAL
73
3.16.4. Restoring a Test Record
Use the steps below to restore a test record from the TRM’s internal Flash EEPROM or a
connected USB Flash drive to the working memory:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[3]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
Press the
[1]
key (RESTORE RECORD).
NOTE
Option 5 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the unit.
If a USB Flash drive is connected, continue to step d.
If a USB Flash drive is NOT connected, continue to step e.
1.
RESTORE RECORD
2.
SAVE RECORD
3.
RECORD DIRECTORY
4.
ERASE RECORD
5.
COPY TO THUMB DRIVE
1.
RECORD ID
2.
PRINT RECORD
3.
SAVE/RESTORE RECORD
4.
SET TIME
5.
SET LANGUAGE
1.
RUN TEST
2.
SETUP
3.
USER DIAGNOSTICS
07/27/12
07:45:35
22
°C 72°F