Vanguard TRM-203_403 User Manual
Page 70
TRM-203 AND TRM-403 USER’S MANUAL
REV 1
66
e. The following screen will be displayed:
Press the
[ENTER]
key to continue.
f. The degaussing process will start and updates will be displayed on the screen as shown
below:
The above process will be repeated for the remaining two phases. When the process is
complete, you will be returned to the “START-UP” menu.
* DEGAUSSING XFMR *
H/X1-H/X0
SETTING CORE...
CHARGING REVERSE
RESETTING CORE
-> PHASE COMPLETE
** XFMR ENERGIZED! **
* DEGAUSSING XFMR *
H/X1-H/X0
SETTING CORE...
CHARGING REVERSE
-> RESETTING CORE
** XFMR ENERGIZED! **
* DEGAUSSING XFMR *
H/X1-H/X0
SETTING CORE...
-> CHARGING REVERSE
** XFMR ENERGIZED! **
* DEGAUSSING XFMR *
H/X1-H/X0
-> SETTING CORE...
** XFMR ENERGIZED! **
THIS MAY TAKE SEVERAL
MINUTES TO COMPLETE.
DEGAUSS: 3 PHS YN
"ENTER" TO CONTINUE