Vanguard TRM-203_403 - Manual (Page 87)

REV 1 TRM-203 AND TRM-403 USER’S MANUAL
83
Press any key to return to the “START-UP” menu.
e. The following screen will be displayed:
1. ERASE SINGLE REC
Press the [1] key (ERASE SINGLE REC) to erase a single test record from the unit’s
Flash EEPROM. The following screen will be displayed:
Type the record number that you would like to erase and then press the [ENTER]
key. If you do not know the record number, you can first print a record directory
(please see section 3.16.3). The selected record will be erased and the following
screen will be displayed:
Press any key to continue. The following screen will be displayed allowing you to
continue deleting additional records from the unit’s internal Flash EEPROM:
RECORD NUMBER 1
ERASED!
ERASE RECORD
NUMBER:
ERASE RECORD
1. ERASE SINGLE REC
2. ERASE ALL RECORDS
"STOP" TO EXIT
ALL THUMB DRIVE
RECORDS ERASED!