Vanguard TRM-203_403 User Manual
Page 73
REV 1 TRM-203 AND TRM-403 USER’S MANUAL
69
3.16.2. Printing the Contents of the Working Memory
Whenever a test is performed and the reading is kept, the data is temporarily stored in the
TRM’s working memory. You can print the test reading in the unit’s working memory using the
steps below:
a. Start from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[2]
key (PRINT RECORD).
c. The following screen will be displayed while the report is being printed:
You will be returned to the “START-UP” menu when printing is finished.
PRINTING REPORT
PLEASE WAIT...
1.
RECORD ID
2.
PRINT RECORD
3.
SAVE/RESTORE RECORD
4.
SET TIME
5.
SET LANGUAGE
1.
RUN TEST
2.
SETUP
3.
USER DIAGNOSTICS
07/26/12
13:45:35
22
°C 72°F