Vanguard TRM-203_403 User Manual
Page 81
REV 1 TRM-203 AND TRM-403 USER’S MANUAL
77
3.16.5. Copying Test Records to a USB Flash Drive
Use the steps below to copy one or all test records from the unit’s Flash EEPROM to a
connected USB Flash drive:
a. Make sure a USB Flash drive is connected to the unit’s “USB MEM” port, and then start
from the “START-UP” menu:
Press the
[2]
key (SETUP).
b. The following screen will be displayed:
Press the
[3]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
Press the
[5]
key (COPY TO THUMB DRIVE).
1.
RESTORE RECORD
2.
SAVE RECORD
3.
RECORD DIRECTORY
4.
ERASE RECORD
5.
COPY TO THUMB DRIVE
1.
RECORD ID
2.
PRINT RECORD
3.
SAVE/RESTORE RECORD
4.
SET TIME
5.
SET LANGUAGE
1.
RUN TEST
2.
SETUP
3.
USER DIAGNOSTICS
07/27/12
07:45:35
22
°C 72°F