Vanguard TRM-203_403 - Manual (Page 58)

TRM-203 AND TRM-403 USER’S MANUAL REV 1
54
h. The following screen will be displayed:
Use the
[∧]
and
[PAPER ∨ Contrast]
keys to adjust the D.U.T. (Device Under Test)
temperature.
Press the [ENTER] key to confirm the D.U.T. temperature setting.
i. The following screen will be displayed:
Use the [∧] and [∨] keys to adjust the reference temperature.
Press the
[ENTER]
key to confirm the reference temperature setting.
j. The following warning screen will be displayed:
This warning is a reminder that the next sequence of test steps will run current through
the test load.
Press any key to continue.
***** WARNING! *****
DANGEROUS FLASH-OVER
WILL OCCUR IF CABLES
ARE DISCONNECTED!
********************
REFERENCE TEMP:
75.0
°
C 167.0
°
F
↑↓
to adjust tk
"ENTER" to accept
D.U.T. TEMP:
25.0
°
C 77.0
°
F
↑↓
to adjust tk
"ENTER" to accept