Vanguard TRM-203_403 User Manual
Page 85
REV 1 TRM-203 AND TRM-403 USER’S MANUAL
81
d. The following screen will be displayed:
1. ERASE INTERNAL REC
Press the
[1]
key (ERASE INTERNAL REC) if you would like to erase test records that
are stored in the unit’s internal Flash EEPROM. Continue to step e.
2. ERASE THUMB DRV REC
Press the
[2]
key (ERASE THUMB DRV REC) if you would like to erase test records
that are stored on a connected USB Flash drive. The following screen will be
displayed:
1. ERASE SINGLE REC
Press the
[1]
key (ERASE SINGLE REC) to erase a single record from the USB Flash
drive. The following screen will be displayed:
Type the record number that you would like to erase and then press the
[ENTER]
key. If you do not know the record number, you can first print a
record directory (please see section 3.16.3). The selected record will be erased
and the following screen will be displayed:
ERASE THUMB DRIVE
REC_
ERASE RECORD
1.
ERASE SINGLE REC
2.
ERASE ALL RECORDS
"STOP" TO EXIT
1.
ERASE INTERNAL REC
2.
ERASE THUMB DRV REC