Yokogawa In-Situ Gas Analyzer TDLS200 - Manual (Page 57)

6-1
IM 11Y01B01-01E-A 6th Edition :Feb 13, 2013-00
<6. BASIC OPERATION>
6.1 Menu Structure Map
6 BASIC OPERATION
Online Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu
Basic MENU Select A/O Mode
-Block (mA value)
-Track
-Hold
*Password Protected
Configure Process Path Length
Pressure*
Temperature*
*(Similar to Process Path)
IP Address
Serial No.
Version
Old
New
View Spectra Raw Detect Spectrum
Absorption Spectrum Spectrum Capture
Spectrum Capture
Data Alarm History
Cal History View Data on-screen
View Data on-screen
Trends Refresh
Gas 1 Concentration
STDEV of Gas 1 Concentration*
Gas 2 Concentration*
STDEV of Gas 2 Concentration*
Transmission*
Laser Temp Setpoint*
Laser Temp in degC*
Peak Center Position*
Gas Temperature*
Gas Pressure*
*(Similiar to Gas 1 Concentration)
Refresh Current Trend screen
Min
Max
Minutes
ADVANCED
*Password
Protected
Configure Process Path Length Current
New Confirmation of Change
Confirmation of Change
Pressure fixed
Active*
Control*
*(similar to Fixed)
Current-New
4-20 mA & Backup
Desired, Range, Center of
Pressure control Confirmation of Change
Confirmation of Change
Confirmation of Change
Temperature fixed
Active Input*
Active Ambient*
Active Peaks*
Control*
*(similar to Fixed)
Current-New
4-20 mA & Backup
Offset
Range of second peak option
Desired range of tem control Confirmation of Change
Confirmation of Change
Confirmation of Change
Confirmation of Change
Confirmation of Change
Non-Process Parameter Path Length
Pressure*
*(similar to Path Length)
Current
New
Temperature fixed or Active
value or offset
Concentration Gas 1 - Current
Gas 1 - New
Gas 2 - Current
Gas 2 - New
Alarm Selection Warning/ Fault
alarm PH threshold
Units Path Length Select from in, ft, cm, m
Pressure
Select from psiA, barA, kPa,
torr, atm
Tempterature Select from ˚F, ˚C, ˚K