Yokogawa In-Situ Gas Analyzer TDLS200 - Manual (Page 96)

6-39 6-40
IM 11Y01B01-01E-A 6th Edition :Feb 13, 2013-00
<6. BASIC OPERATION>
To shut down the RIU, press the Esc key and the screen will appear as
shown. Press 9 to continue with the shut-down process and when the
RIU screen turns white, the power can be switched off.
Note, there is no watch-dog in the RIU so un-like the TDLS-200, it will
not automatically re-start after a period of time if power is not switched
off.
ALWAYS “END VNC SESSION” TO ANALYZER WHEN DONE – THIS
WILL PREVENT THE ANALYZER AND/OR RIU FROM ‘HANGING’!
DO NOT LEAVE THE RIU PERMANENTLY CONNECTED TO
ANALYZER – CONNECT ONLY WHEN IN USE