Yokogawa GC1000 Mark II Process Gas Chromatograph - Manual (Page 2)

<Toc> <Ind> <Rev> <Introduction>
i
IM 11B03A03-01E Media No. IM 11B03A03-01E 3rd Edition : Aug. 2006 (YK)
All Rights Reserved Copyright © 2001, Yokogawa Electric Corporation
3rd Edition : Aug. 23. 2006-00
◆
Notice
● Regarding This Manual
1. This Manual should be passed on to the end user.
2. Read this manual carefully and fully understand how to operate this product before
you start operation.
3. Yokogawa makes no warranty of any kind with regard to this material, but not limited
to, implied warranties of merchantability for particular purpose.
4. All rights reserved. No part of this manual may be reproduced in any form without
Yokogawa’s written permission.
5. Great effort has been expended to ensure that the descriptions in this manual are
correct. Should you, however, come across a questionable area or note an inconsis-
tency, a telephone call or letter to Yokogawa.co.,ltd. noting the questionable area
would be highly appreciated.
6. The contents of this manual are subject to change without prior notice.
● Regarding Protection, Safety, and Prohibition Against Unauthorized Modifica-
tion.
1. For the protection and safe use of the product and the system controlled by it, be sure
to follow the instructions on safety described in this manual when handling the prod-
uct. In addition, if you handle the product in contradiction to these instructions, our
company does not guarantee safety.
2. The following safety symbol marks are used on the product concerned or in this
Manual :
WARNING
A WARNING sign denotes a hazard. It calls attention to procedure, practice, condition
or the like, which, if not correctly performed or adhered to, could result in injury or
death of personnel.
CAUTION
A CAUTION sign denotes a hazard. It calls attention to a procedure, practice, condi-
tion or the like, which, if not correctly performed or adhered to, could result in damage
to or destruction of part or all of the product.
IMPORTANT:
Indicates that operating the hardware or software in this manner may damage it or
lead to system failure.
NOTE:
Draws attention to information essential for understanding the operation and features.
TIP:
Gives information that complements the present topic.