3 actions of stream (1 cycle), Actions of stream (1 cycle) -13 – Yokogawa GC1000 Mark II Process Gas Chromatograph User Manual
Page 48
<Toc> <Ind>
<4. Outline of Software >
4-13
IM 11B03A03-01E
4.4.3
Actions of Stream (1 cycle)
Stream (1 cycle) 1 to 31 is allowed to be specified only when the measurement status is in
Stream Sequence 1 to 4. The same action is performed when the Stream (1 cycle) is
specified at any timing during analysis.
(1)
When Stream (1 cycle) 1 to 31 is specified while the measurement status is in Stream
Sequence 1 to 4 and the operation mode is in Stop or in Pause, the specified stream
is measured once and then the measurement status turns to Stream Sequence 1 and
the operation mode returns to Stop.
(2)
An action when Stream (1 cycle) 4 is specified while the measurement status is in
Stream Sequence 1 and the operation mode is in Run, is shown in Figure 4.12.
W3
W1
W2
W3
W2
S1
S2
S3
W4
S4
S1
S2
Select the Stream (1 cycle) 4
Time
Stream Sequence 1
Stream Sequence 1
Stream (1 cycle) 4
S1 to S4: Analysis cycles for streams 1 to 4
W1 to W4: Warming up time for streams 1 to 4
F0412.EPS
Figure 4.12
Action of Stream (1 cycle)
3rd Edition : Aug. 23. 2006-00