Yokogawa EXAxt PH450 4-Wire Analyzer for pH and ORP - Manual (Page 24)

16
IM 12B07C05-01E
Remove
standard tule
Figure 3.11.b. Content of grommet set
Figure 3.11.a. Grommet set use
3-7-2. Sensor cable connection with special
grommet (450G-
□
-A version)
In order to seal multiple sensor cables into
EXAxt 450, a special grommet is provided that
is designed to accommodate one, two or three
sensor cables (5 mm dia.) plus a liquid earth
cable (2.5 mm dia.). In the pack with the grom-
met are blanking pieces to close any unused
holes. When correctly assembled, the grom-
met maintains the IP66 and NEMA 4X rating of
the EXAxt 450 housing.
Note! The special grommet is intended to be
used to seal the multiple cables from
the Yokogawa flow fittings such as
FF20.
The designated cables are
WU20 sensor cables, which are
approximately 5 mm (0.2“) in diameter,
and K1500FV liquid earth cables,
which are approximately 2.5 mm (0.1“)
in diameter.
For sensor systems using a single cable, like
the FU20 and the PR20, PD20, PF20 and
PS20, the standard gland will accommodate
the cable adequately. Single cables between
approximately 6 mm and 12 mm (0.24 “ and
0.47 “) can be sealed properly with these
glands and the standard tule.