Yokogawa Button Operated MV2000 - Manual (Page 106)

4-33
Commands
M-4662
1
2
3
4
5
6
7
App
Index
Example Set the offset time from the GMT to 9 hours
ahead and the deviation limit to 30 s.
XG0900,30S
XN Sets the date format
Syntax XN p1<terminator>
p1
Date format (Y/M/D, M/D/Y, D/M/Y, D.M.Y)
Query XN?
Example Set the date format to Y/M/D.
XNY/M/D
YB Sets host information
Syntax YB p1,p2<terminator>
p1
Host name (up to 64 characters)
p2 Domain name (up to 64 characters)
Query YB?
Example Set the host name to RD-MV1000 and the
domain name to mvadv.daqstation.com.
YBmv1000,mvadv.daqstation.com
YD Sets network settings
To not automatically obtain network parameters
Syntax YD p1,p2,p3<terminator>
p1
Automatic allocation (NOT)
To automatically obtain network parameters
Syntax YD p1,p2,p3<terminator>
p1
Automatic allocation (USE)
p2 Obtain DNS info (USE, NOT)
p3 Automatic host name registration (USE,
NOT)
Query YD?
Example Set the IP address to auto allocation, get DNS
information, and automatically register the host
name.
YDUSE,USE,USE
YA Sets the IP address, subnet
mask, and default gateway
Syntax YA p1,p2,p3<terminator>
p1
IP address (0.0.0.0 to 255.255.255.255)
p2 Subnet mask
(0.0.0.0 to 255.255.255.255)
p3 Default gateway
(0.0.0.0 to 255.255.255.255)
Query YA?
Example Set the IP address to 192.168.111.24, the subnet
mask to 255.255.255.0, and the default gateway
to 0.0.0.0.
YA192.168.111.24,255.255.255.0,0.0.0.0
Description The settings specified with this command take
effect when you save the settings with the XE
command and power-cycle the MV.
YK Sets the keepalive feature
Syntax YK p1<terminator>
p1
Keepalive ON/OFF
Query YK?
Example Disable keepalive.
YKOFF
Description The settings specified with this command take
effect when you save the settings with the XE
command and power-cycle the MV.
RU Sets DNS parameters
To set server parameters
Syntax RU p1,p2,p3<terminator>
p1
Setting type (SERVER)
p2 Primary DNS server address
(0.0.0.0 to 255.255.255.255)
p3 Secondary DNS server address
(0.0.0.0 to 255.255.255.255)
To set suffix parameters
Syntax RU p1,p2,p3<terminator>
p1
Setting type (SUFFIX)
p2 Domain suffix 1 (up to 64 characters)
p3 Domain suffix 2 (up to 64 characters)
Query RU[ p1]?
Example Set domain suffix 1 to rec1.daqstation.com and
domain suffix 2 to rec2.daqstation.com.
RUSUFFIX,rec1.daqstation.com,rec2.daqstation.com
WS Sets a server
Syntax WS p1,p2<terminator>
p1
Server type (FTP, WEB, MODBUS, SNTP)
p2 Server usage (USE, NOT)
Query WS[ p1]?
Example Enable the Web server.
WSWEB,USE
4.6 Basic Setting Commands