Yokogawa Button Operated MV2000 - Manual (Page 88)

4-15
Commands
M-4662
1
2
3
4
5
6
7
App
Index
Example Display trip line 1 in red at the 10% position of
group 1. Set the line width to 1.
SL1,1,ON,10,RED,1
Description The width of the waveform display area along the
amplitude axis is assumed be 100%.
SG Sets a message
Syntax SG p1,p2<terminator>
p1
Message number (1 to 100)
p2 Message (up to 32 characters)
Query SG[ p1]?
Example Set character string “MESSAGE1” in message
number 2.
SG2,MESSAGE1
Description For the characters that can be used in a
message, see appendix 1, “ASCII Character
Codes.” However, you cannot use a semicolon or
comma in a message.
TH Sets the data storage directory
on an external storage medium
Syntax TH p1<terminator>
p1
Directory name (up to 20 characters)
Query TH ?
Example Save data to the DATA1 folder on the external
storage medium.
THDATA1
TZ Sets the file header
Syntax TZ p1,p2<terminator>
p1
1
p2 File header (up to 50 characters)
Query TZ[ p1]?
Example Set the header to MV1000DATA.
TZ1,MV1000DATA
TF Sets the data file name
Syntax TF p1,p2,p3<terminator>
p1
1
p2 Configuration
BATCH File name specified by the batch
function
DATE User-assigned character string +
the date
SERIAL User-assigned character string + a
serial number
p3 User-assigned name (up to 16 characters)
(valid when p2 is DATE or SERIAL)
Query TF[ p1]?
Example Set the file name to the user-assigned string
MV1DATA followed by a serial number.
TF1,SERIAL,MV1DATA
SD Sets the date and time
Syntax SD p1,p2<terminator>
p1
Date (YY/MM/DD)
YY Year (00 to 79)
MM Month (01 to 12)
DD Day (01 to 31)
p2 Time (HH/MM/SS)
HH Hour (00 to 23)
MM Minute (00 to 59)
SS Second (00 to 59)
Query SD?
Example Set the internal clock to 13:00:00, October 1,
2005.
SD05/10/01,13:00:00
Description The syntax for p1 and p2 is fixed to eight
characters. Use the syntax below. Do not insert
spaces; otherwise an error will occur.
p1 = YY/MM/DD (Lower two digits of the year/
month/day)
p2 = HH:MM:SS (Hour:minute:second)
TT Sets the trend display
Syntax TT p1,p2,p3,p4,p5<terminator>
p1
Graph display direction
HORIZONTAL Horizontal display
VERTICAL Vertical display
WIDE Horizontal wide
display
SPLIT Horizontal split
display
p2 Clear waveform at start ON/OFF
p3 Message display direction
HORIZONTAL
VERTICAL
p4 Scale display digits
NORMAL 3-digit display
FINE 4-digit display
p5 Current value display
MARK Display using a mark
BARGRAPH Display using a bar
graph
Query TT?
Example Set the waveform to horizontal display and the
message direction to vertical, and display the
waveform by clearing the existing waveform at
memory start.
TTHORIZONTAL,ON,VERTICAL
4.4 Setting Commands (Setting)