Yokogawa Button Operated MV2000 - Manual (Page 95)

4-22
4.4 Setting Commands (Setting)
M-4662
Description • Selectable items for p3 and subsequent
parameters vary depend on the p2 setting.
• If you omit parameters p3 and subsequent
parameters, all menus items will be hidden.
• A command error will occur if you specify the
same menu item multiple times.
• You can specify up to three separators. If you
specify more than three, an error will occur.
• You cannot specify EXPAND for LOG and
4PANEL.
• You cannot omit parameters by using
delimiters (, ,).
• If you execute SM DISP_SUB?, the MV also
transmits submenus of main menu items that
are turned Off.
• If you set the first menu item to SEPARATOR,
it will be ignored.
• The Show/Hide setting for the group
designation parameters, GROUP1 to
GROUP36, and the auto switching parameter,
AUTO, are applied universally to Trend,
Digital, Bar Graph, and Historical Trend. (For
example, if you set AUTO to Hide for Trend
and then set AUTO to Show for Digital, AUTO
will be set to Show for Trend, Digital, Bar
Graph, and Historical Trend.)
To set the function menu
p1 Type (FUNC)
p2–p28 Menu items to be displayed
The menu items for the functions you select
from below are displayed in the specified
order.
Only the specified menu items are displayed.
ALARMACK Alarm acknowledge
MESSAGE
FREE_MESSAGE
TRIGGER
Event trigger
SAVE_DISPLAY Save the display data
SAVE_EVENT Save the event data
MANUAL_SAMPLE
SNAPSHOT
BATCH
MATH_START/STOP
MATH_RESET
MATH_ACK
Math data dropout
acknowledge
KEYLOCK Enable/disable key
lock
LOGOUT
PASSWORD_CHANGE
EMAIL_START/STOP
EMAIL_TEST
FTP_TEST
SNTP
MEDIA_EJECT
Eject the storage
medium
SYSTEM_INFO System information
NETWORK_INFO Network information
TEXT_FIELD Text field display
4PANEL
JUMP_DISPLAY
Register the home
display
RATE_CHANGE Display rate 1/display
rate 2
FAVORITE_REGIST Register as favorite
SAVE_STOP Stop the save
operation
TIMER_RESET
PAUSE_DISPLAY
Stop the monitor
LCD_SAVER Backlight saver
MATCH_T_RESET Reset the single
match timer
Example Display FREE MESSAGE and SNAPSHOT for
the first and second function menu items.
SMFUNC,FREE_MESSAGE,SNAPSHOT
Description • A command error will occur if you specify the
same menu item multiple times.
• You cannot specify SEPARATOR.
• You cannot omit parameters by using
delimiters (, ,).
• You cannot hide LOGOUT. If it is not included
in the parameters, it is displayed as the last
menu item.
Query SM ?
To query all menu items
SM DISP_MAIN?
To query all main menu items
SM DISP_SUB?
To query all submenu items
SM DISP_SUB,TREND?
To query the Trend submenu items
SM FUNC?
To query all function menu items
SY Sets the 4 panel display
Syntax SY p1,p2,p3,p4,p5,p6,p7,p8,p9,p10,
p11<terminator>
p1
1
p2 Screen number (1 to 4)
p3 Screen group name (up to 16 characters)
p4 Screen 1 type
TREND Trend display
DIGITAL Digital display
BAR Bar graph display
OVERVIEW