Yokogawa Button Operated MV2000 - Manual (Page 16)

M-4662 2-2
2.2 Connecting the MV
Connecting to the Port
Ethernet Port
Connect an Ethernet cable to the Ethernet port on the MV rear panel.
Ethernet cable
CAUTION
Be sure to connect an Ethernet cable
with an FCC-compliant plug. Otherwise,
the MV may malfunction.
Connecting to a PC
Connect the MV to a PC via a hub. To make a one-to-one connection, see the figure
below. You can connect multiple MVs to a single PC in the same way.
Hub
MV
Ethernet cable
PC