Yokogawa Button Operated MV2000 - Manual (Page 90)

4-17
Commands
M-4662
1
2
3
4
5
6
7
App
Index
SQ Sets the LCD brightness and
screen backlight saver
Syntax SQ p1,p2,p3,p4<terminator>
p1
LCD brightness
1–8 RD-MV1000
1–6 RD-MV2000
p2 Type of display backlight saver function
OFF Disable the saver function
DIMMER Dim
TIMEOFF Turn OFF
p3 Time to switch to saver mode
1MIN , 2MIN, 5MIN, 10MIN, 30MIN, 1H
p4 Event that causes the MV to return from
saver mode
KEY
Pressing of a key
KEY+ALARM Pressing of a key or an alarm
occurrence
Query SQ?
Example Set the LCD brightness to 2 and the screen
backlight saver function to dim. Set the time to
switch to saver mode to 5 minutes and the event
that causes the MV to return from saver mode to
pressing of a key.
SQ2,DIMMER,5MIN,KEY
Description If p2 is set to OFF, do not specify p3 or p4.
TC Sets the background color
Syntax TC p1,p2<terminator>
p1
Display screen (WHITE, BLACK)
p2 Historical trend display (WHITE, CREAM,
LIGHTGRAY, BLACK)
Query TC?
Example Set the display background to black and the
historical display background to cream.
TCBLACK,CREAM
TP Sets auto group switching
Syntax TP p1<terminator>
p1
Auto scroll time (5S, 10S, 20S, 30S, 1MIN)
Query TP?
Example Switch the group at 5-s intervals.
TP5S
TR Sets auto monitor recovery
Syntax TR p1<terminator>
p1
Auto recovery time (OFF, 1MIN, 2MIN,
5MIN, 10MIN, 20MIN, 30MIN, 1H)
Query TR?
Example Set the auto recovery time to 5 minutes.
TR5MIN
TQ Sets a timer
If p2 is set to OFF (no timer)
Syntax TQ p1,p2<terminator>
p1
Timer number (1 to 4)
p2 Timer type (OFF)
If p2 is set to ABSOLUTE (absolute time)
Syntax TQ p1,p2,p3,p4<terminator>
p1
Timer number (1 to 4)
p2 Timer type (ABSOLUTE)
p3 Time interval (1MIN to 6MIN, 10MIN, 12MIN,
15MIN, 20MIN, 30MIN, 1H to 4H, 6H, 8H,
12H, 24H)
p4 Reference time (hh)
hh Hour (00 to 23)
If p2 is set to RELATIVE (relative time)
Syntax TQ p1,p2,p3,p4<terminator>
p1
Timer number (1 to 4)
p2 Timer type (RELATIVE)
p3 Time (hh:mm)
hh Hour (00 to 24)
mm Minute (00 to 59)
p4 Reset at computation start (ON/OFF)
Query TQ[ p1]?
Example Set the timer number 1 timeout value to 10 hours 30
minutes. Do not reset at start.
TQ1,1,RELATIVE,10:30,OFF
TK Sets a match timer
If p2 is set to OFF (not use a match timer)
Syntax TK p1,p2<terminator>
p1
Timer number (1 to 4)
p2 Timer designation (OFF)
If p2 is set to DAY (time designation)
Syntax TK p1,p2,p3,p4,p5<terminator>
p1
Timer number (1 to 4)
p2 Timer designation (DAY)
p3 Day (1 to 28)
p4 Time (hh:mm) (00:00 to 23:59)
p5 Timer operation (SINGLE, REPEAT)
SINGLE Single operation
REPEAT Repetitive operation
If p2 is set to WEEK (day of week/time designation)
Syntax TK p1,p2,p3,p4,p5<terminator>
p1
Timer number (1 to 4)
p2 Timer designation (WEEK)
p3 Designation of the day of the week (SUN,
MON, TUE, WED, THU, FRI, SAT)
p4 Time (hh:mm) (00:00 to 23:59)
p5 Timer operation (SINGLE, REPEAT)
4.4 Setting Commands (Setting)