KANOMAX 3900 Portable Particle Counter - Manual (Page 13)

2. Getting Started 6
2.5 Consumables
2.5.1 Printer Paper Replacement
Preparing printer paper
When the provided printer paper runs out, please purchase new printer paper (dust free paper), Model 3900-05.
Installing printer paper
1. Press the Paper Cover Open Button to open the paper cover.
2. Place the paper as shown in the below picture.
3. Pull the head of paper slightly from the outside the printer. Make sure that slight portion of the paper head is
out of the printer when closing the cover.
2.5.2 Zero Filter Replacement
Preparing a Zero Filter
When performance of the provided zero filter is deteriorated, please purchase a new Zero Filter (w/t joint and tube
(70cm)), Model 3900-04.
To replace a Zero Filter, refer to 2.3 Zero Check.
2.5.3 Standard Inlet Replacement
Preparing a Standard Inlet
When the provided Standard Inlet is damaged or lost or any air leak is detected, please purchase a new Standard Inlet,
Model 3900-06.
To replace a Standard Inlet, please refer to 2.3 Zero Check.
2.5.4 Isokinetic Suction Probe Replacement
Preparing an Isokinetic Suction Probe
When the provided Isokinetic Suction Probe is damaged or lost or any leak is detected, please purchase a new
Isokinetic Suction Probe, Model 3900-07.
To install Isokinetic Suction Probe, please refer to 2.4 Isokinetic Suction Probe.