KANOMAX 3900 Portable Particle Counter - Manual (Page 54)

3. Display Description and Operation Procedure 47
Tap [PRESET] to display a window asking you to
input PRESET NAME.
Tap the entry field to display the keyboard. Enter the
file name and tap [Enter].
Tap [OK] to save the current settings on the CF card.
You can configure the saved measurement settings
by loading a saved PRESET (Authentication
required).
Refer to 3.9 PRESET.
Tap [MAP] button to display MAP.
You can change the location order.
Tap the Location to be changed. Use and
buttons to change the order.
Tap [OK]. Then a window will be displayed asking if
you want to save the new order of the Location. Tap
[Yes] or [No].
Tap [Yes] to save the changes and go back to
[CONFIG] setting screen. (Authentication required).
Tap [No] to go back to display MAP.
Tap [CANCEL] to discard the changes and go back
to “MEASURE SETTING” screen..