KANOMAX 3900 Portable Particle Counter - Manual (Page 49)

3. Display Description and Operation Procedure 42
3.7.3 INTERVAL
You can set INTERVAL, SAMPLE T., CYCLES and
MANUAL STOP.
To set INTERVAL and SAMPLE T, tap the entry field
to display a numeric keypad. Enter “hour”, “minute”
and “second”, and tap [OK].
Tap entry field for CYCLES to display a numeric
keypad. Tap the value you want to enter and tap [Enter].
Check “MANUAL STOP” to continue measuring until
you stop measuring regardless of the CYCLES setting.
Check “AUTO SAVE” to store data automatically.
Check “AUTO PRINT” to print data automatically.
Check “START DELAY” to use delay time prior to a
measurement.
Check “Set time” to set the time when you want to start
a measurement.
Tap [OK] to save and activate the settings
(Authentication required).
Tap [PRESET] to display a window asking you to input
“PRESET NAME”.
Tap the entry field to display the keyboard. Enter the
file name and tap [Enter].
Tap [OK] to save the current settings on the CF card
(Authentication required).
* In the future you can automatically load the
configuration saved here as a PRESET. Refer to 3.9
PRESET.
<Input PRESET NAME>