KANOMAX 3900 Portable Particle Counter - Manual (Page 30)

3. Display Description and Operation Procedure 23
Tap [STOP] to stop a measurement.
Tap button while measuring to display a chart.
When a measurement at each measurement point is
finished, a measurement result window will be
displayed each time.
Tap [NEXT] to display “CONFIRM” window
informing you the next measurement point, and wait
for the next measurement.
Tap [REMEASURE] to perform a re-measurement.
Tap [PRINT] to print a measurement result.
When all of the measurements are finished, a
measurement result will be displayed.
You can view the result of a certain LOCATION
POINT by selecting Location.
Tap [CLOSE] to stop a measurement.
Tap [REMEASURE] to perform a measurement
again at the last measurement point.
Tap [PRINT] to print a measurement result at the last
measurement point.
Every time you tap this button, the
particle unit changes in the order of:
p -> p/cf -> p/m³. Use this button to select either Total
display or Single display. (Only
applicable for RAW DATA)