KANOMAX 3900 Portable Particle Counter - Manual (Page 62)

3. Display Description and Operation Procedure 55
3.10.3 OPTION
In the OPTION window you can configure the
following settings;
- CHART
- ALARM
- STANDARD
- MESSAGE
- PRINT
- START DELAY
-
· CHART SETTING
Configure the axis of the chart and range settings.
For X Axis select either “10”, “20”, “50”, “100”,
“150” or “300”.
For Y Axis in PARTICLE tab select either “LOG”
or “LINEAR”.
Select which MAX value to be set among four
options.
You can set 4 different max values each for “LOG”
and “LINEAR”.
When you configure the chart setting as shown above, the chat will be shown as below.
MAX value set in the PARTICLE tab in the CHART SETTING
window is applied in the chart.
Tap
MAX value to change it.
(It changes in the order of “10”, “20”, “50”, “100”, “150” “300”.)
MAX value set in the
PARTICLE tab in the
CHART SETTING window
is applied in the chart.
Tap
MAX value to change it.
(It changes in the order of
MAX setting 1, 2, 3, 4.)
Y-axis in LINEAR scale
X-axis
Y-axis in LOG scale