KANOMAX 3900 Portable Particle Counter - Manual (Page 55)

3. Display Description and Operation Procedure 48
3.8 FILE
Select [FILE] on the initial screen. Then a screen shown on the
left will be displayed. You can display, print and delete data
here. You can also display the list of files that has been output
in the ALARM/ERROR LOG screen.
*User needs to have authorization to copy file.
*User needs to have authorization to delete file.
The file name consists of
abbreviation of the measurement mode + Date + Time.
The measurement mode abbreviations are;
(a) To display names of every saved file, check
“OPEN”. (When this window “FILE
SELECT” is open, “OPEN” is checked.)
(b) Use “MEASURE MODE” to narrow down the files to
be displayed.
(c) After you select the file that you want to display, the file
name will be displayed in the box for “FILE NAME”.
Then tap [OK] to display the data display screen as
shown below.
Tap CALC DATA tab to display CALC result.
Tap SETTING tab to display the setting information.
(e) To delete data file displayed, tap [DELETE]. Then a dialog will be
displayed asking you if you want to delete it or not. Tap [YES] to
delete the data file displayed.
(f) Tap [PRINT] to print the data.
(g) Tap [CLOSE] to close a window.
(h) In STATS mode and STANDARD mode, you can change the data to
be displayed by selecting LOCATION.
SG: SINGLE IS: ISO
CO: CONTINUOUS FS: FEDERAL STANDARD
IN: INTERVAL BS: BRITISH STANDARD
RP: REPEAT EC: EC GMP
ST: STATS GB: GB/T
Data Display Screen
<CALC TAB DATA>
(e) (f) (g)
(h)
<RAW DATA TAB>
(h)
(e) (f) (g)
<SETTING TAB>
(e) (f) (g)
(h)