KANOMAX 3900 Portable Particle Counter - Manual (Page 41)

3. Display Description and Operation Procedure 34
3.6.4 Interlocking Operations
On the screen displaying data for 6 particle sizes
while sampling, tap a particle size on the screen to
display the data of the particular particle size. Then
to display data for 6 particle sizes back again, tap
the particle size on the screen.
<SINGLE and CONTINUOUS mode>
On the screen with data of each particle size,
tap to switch to display a chart while
measuring.
Particle size based histogram will be
displayed in SINGLE and CONTINUOUS
mode.
Tap again to go back to the display with
data for 6 particle size.
Every time you tap the particle unit,
it changes in the order of:
p -> p/cf -> p/m³.