KANOMAX 3900 Portable Particle Counter - Manual (Page 18)

3. Display Description and Operation Procedure 11
3.3 Initial Screen
3.3.1 Initial Screen
When the instrument is booted up, the initial
screen on the left will be displayed.
All operations can be started from this screen.
(1) Data Display:
Displays numeric value and chart.
(2) Measurement Condition: Displays measurement mode, measurement setting and measurement status.
(3) Environment Data: Displays the current status when using option sensors.
(4) Status Display: Displays the status of power source, pump, LD error, over count, alarm and data
storage.
(5) MENU: Configures chart setting, alarm setting and system setting.
FILE: Loads, prints and deletes stored measurement data.
PRESET: Loads stored measurement setting file.
CONFIG: Configures advanced setting in the currently selected mode. Items such as
INTERVAL, SAMPLE T. and CYCLES can be set in each mode.
MODE: Selects measurement mode. Select either “SINGLE”, “CONTINUOUS”,
“INTERVAL”, “REPEAT”, “STATS” or “STANDARD” mode.
MONITOR: Performs a measurement and displays a measurement value. This mode does not save
measurement results. Measurement display value is updated every second.
START: Starts measuring in the configured mode. This button becomes “STOP” button after
sampling starts. Tap “STOP” button to stop sampling.
(6) PUMP: Tap “PUMP” button to turn ON/OFF the pump manually.
SAVE: Tap “SAVE” button to turn ON/OFF the data storage function while sampling.
PRINT: Tap “PRINT” button to turn ON/OFF the data printing function while sampling.
Alarm Pr: Tap “Alarm Pr” button to turn ON/OFF the alarm printing function while sampling.
ALARM: Tap “ALARM” button to turn ON/OFF data alarm function while sampling.
(3)
(6)
(1)
(2)
(4)
(5)