ADTRAN ATLAS 810 Plus - Manual (Page 104)

Chapter 9. Dial Plan Terminal Menu
9-10 ATLAS 810 PLUS User Manual 61200266L1-1
INTERFACE CONFIGURATIONS
This section describes Dial Plan Network Termination and User Termina-
tion configuration settings for the following modules.
Quad T1/PRI Module (Network Termination/PRI). . . . . . . . . . . . . . . . . page 9-10
Quad T1/PRI Module (Network Termination/NFAS). . . . . . . . . . . . . . . page 9-12
Quad T1/PRI Module (Network Termination/RBS) . . . . . . . . . . . . . . . . page 9-13
Quad T1/PRI Module (User Termination/PRI) . . . . . . . . . . . . . . . . . . . . page 9-16
Quad T1/PRI Module (User Termination/NFAS) . . . . . . . . . . . . . . . . . . page 9-17
Quad T1/PRI Module (User Termination/RBS) . . . . . . . . . . . . . . . . . . . page 9-18
Quad Nx56/64 Module (User Termination) . . . . . . . . . . . . . . . . . . . . . . page 9-20
Octal BRI Module (Network Termination) . . . . . . . . . . . . . . . . . . . . . . . page 9-20
Octal BRI Module (User Termination) . . . . . . . . . . . . . . . . . . . . . . . . . . page 9-21
Quad T1/PRI Module (Network Termination/PRI)
When you are working in the Network Termination section of the Dial Plan ,
Slot is defined as a T1/PRI module, and Sig is set to PRI, the following con-
figuration options are available:
»» Switch Type Write security: 2; Read security: 5
Defines the type of PRI switch that ATLAS is connected to. If connected to
another ATLAS, both need to be set to the same type. The available options
include Lucent 5E, Northern DMS 100, National ISDN, and AT&T 4ESS.
»» First DS0 Write Security: 3 Read Security: 5
Defines the first active DS0 for a fractional PRI.
»» Number of DS0s Write Security: 3 Read Security: 5
Defines the number of DS0s used for calls on this PRI. DS0 24 is assumed to
be used by the PRI for the D channel.