Figure 9-6. completed network map -28 – ADTRAN ATLAS 810 Plus User Manual
Page 122
Chapter 9. Dial Plan Terminal Menu
9-28
ATLAS 810
PLUS
User Manual
61200266L1-1
Figure 9-6. Completed Network Map
When you complete the
User Term
Dial Plan, it appears as shown in Figure
9-7.
Setting User Term Connections
Step
Action
1
Navigate to
User Term.
2
Enter connections for BRI D,E, and F in the same manner as BRI
A, B, and C: use the copy (C) and paste (P) commands to enter
the appropriate Out#Accept and Out#Reject numbers.
3
Ensure that the SPID and Phone entries under Ifce Config match
the SPID and phone numbers of the attached equipment.
4
Enter the connection for T1-A: select RBS under Sig, and enter
1-900-$ under Out#Reject.
5
Set
Trunk Type
(under
Ifce Config) to
Analog.
6
Set
Signaling Method to
E&M Wink
.
7
Set DID (under
Ifce Config) to enabled
.
8
Set the DID Digits Transferred
to
4
.